FXDSQ32AVM

Notes: Specifications are based on the following conditions; •Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 5 m, Height difference: 0 m. •Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 5 m, Height difference: 0 m. •Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) •Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions. *1: Values are based on external static pressure of 10 Pa. *2: External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”. (Factory setting is 10 Pa ) *3: The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A). 200 )C°( tniopteS VRV Indoor Units Cooling Heating 30°C near ceiling Room temperature is calculated as 27°C in the area which is in the vicinity of the person. 24°C near floor 20°C near floor 20°C near floor Absence Presence Example • When there are no 2288°°CC people in a room, the 2277°°CC set temperature is 2266°°CC 2266°°CC shifted automatically. After After Time 30 min another 30 min stinU roodnI

PDF page 201 Comfort and energy saving preventing over cooling / heating Sensing sensor mode • Cooling setpoint: 26°C • Shift temperature: 1.0°C • Shift time: 30 min. Sensing sensor low mode (default: OFF) • Limit cooling temperature: 30°C 28 27 26 Automatically Occupied Unoccupied reverts when people return. Sensing sensor stop mode (default: OFF) • Based on preset user conditions, the system automatically stops operation if the room is unoccupied. *Adjustment is possible for shift time and set temperature by local setting. Specifications MODEL FXDSQ20AVM FXDSQ25AVM FXDSQ32AVM FXDSQ40AVM FXDSQ50AVM FXDSQ63AVM Power supply 1-phase, 220-240/220-230 V, 50/60 Hz Btu/h 7,500 9,600 12,300 15,400 19,100 24,200 Cooling capacity kW 2.2 2.8 3.6 4.5 5.6 7.1 Btu/h 8,500 10,900 13,600 17,100 21,500 27,300 Heating capacity kW 2.5 3.2 4.0 5.0 6.3 8.0 Cooling 0.028 0.029 0.032 0.049 0.054 Power consumption *1 kW Heating 0.024 0.025 0.028 0.045 0.050 Casing Galvanized steel plate m3/min 8.7/8.1/7.6/7.0/6.5 9.0/8.5/8.0/7.5/7.0 10.0/9.3/8.6/7.9/7.2 12.0/11.2/10.5/9.7/9.0 15.0/14.0/13.0/11.5/10.5 19.0/17.0/15.0/13.0/11.5 Airflow rate (H/HM/M/ML/L) cfm 307/286/268/247/229 318/300/282/265/247 353/328/304/279/254 424/395/371/342/318 530/494/459/406/371 671/600/530/459/406 External static pressure Pa 10-0 *2 Sound level (H/HM/M/ML/L)*1 *3 dB(A) 31/29/27/26/24 31/29/27/26/24 34/32/30/29/27 39/37/35/33/31 39/37/35/33/30 Dimensions (H×W×D) mm 200×700×450 200×900×450 200×1,100×450 Machine weight kg 17 20 23 Liquid (Flare) 6.4 9.5 Piping Gas (Flare) mm 12.7 15.9 connections Drain PVC26 (External Dia. 26 / Internal Dia. 20) 3D Auto Dimensions (H×W×D) mm 180×722×70 180×922×70 180×1,122×70 swing Colour Fresh white panel Weight kg 1.0 1.5 2.0 Notes: Specifications are based on the following conditions; •Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 5 m, Height difference: 0 m. •Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 5 m, Height difference: 0 m. •Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) •Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions. *1: Values are based on external static pressure of 10 Pa. *2: External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”. (Factory setting is 10 Pa ) *3: The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A). 200 )C°( tniopteS VRV Indoor Units Cooling Heating 30°C near ceiling Room temperature is calculated as 27°C in the area which is in the vicinity of the person. 24°C near floor 20°C near floor 20°C near floor Absence Presence Example • When there are no 2288°°CC people in a room, the 2277°°CC set temperature is 2266°°CC 2266°°CC shifted automatically. After After Time 30 min another 30 min stinU roodnI FACING PAGE — PDF page 200 3D Airflow Duct with Sensing Type FXDSQ-A 3D airflow with sensing function for comfort and energy savings Comfort 3D airflow The wide coverage of the airflow angle creates a comfortable 3D airflow. • Horizontal & Vertical direction can be adjusted freely by the remote controller settings as to provide 3D airflow to every corner of the room. • Can freely select 5 positions and swing mode for each up/down and left/right direction with remote controller. 5 Horizontal Cooling range 6 0 ° 0 ° Heating range flaps of swing of swing Vertical flaps 45° 45° 5-step & auto airflow control • Control of airflow rate can be selected from 5-step and Auto to provide comfortable airflow. Installation flexibility Only 450 mm Slim design 200 mm • Slim and compact design with a height of only 200 mm and the depth of only 450 mm which is suitable to install in limited spaces. * Panel dimensions are not included. Daikin advanced sensing technology Dual sensors Infrared presence sensor The presence sensor detects where people are and adjusts the airflow direction accordingly. Infrared floor sensor The sensor detects the floor temperature and automatically adjusts operation of the indoor unit to reduce the temperature difference between the ceiling and the floor. 199