TECHNICAL SPECIFICATION SHEET · DAIKIN
RXUQ10AYMW
Outdoor unit · VRV X/A MAX · Corrosion resistant
Data extracted from the English catalogue; not all specifications have been manually verified. Check the original source before use.
| System configuration | |
|---|---|
| Combination units | — / — / — |
| Rated capacity | |
| Cooling capacity · Btu/h | 95,500 |
| Cooling capacity · kW | 28.0 |
| Electrical & efficiency | |
| Power supply | 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz |
| Power consumption · kW | 6.29 |
| Capacity control · % | 13-100 |
| Compressor · Type | Hermetically sealed scroll type |
| Compressor · Motor output · kW | 4.2×1 |
| Airflow & sound | |
| Airflow rate · m3/min | 178 |
| Sound level · dB(A) | 56 |
| Dimensions & weight | |
| Casing colour | Metallic brown |
| Dimensions (H×W×D) · mm | 1,657×1,240×765 |
| Machine weight · kg | (235) |
| Piping & refrigerant | |
| Refrigerant · Type | R-410A |
| Refrigerant · Charge · kg | 8.3 |
| Piping connections · Liquid · mm | 9.5 (Brazing) |
| Piping connections · Gas · mm | 22.2 (Brazing) |
| Operating conditions | |
| Operation range · °CDB | 10 to 49 |
Source reference
PCVVN2507Aaprv · PDF page 112 · Printed page 111
General Catalogue 2025; published on VRV.vn as Catalogue 2026 (EN)
Open catalogue PDF · page 112
Model page: https://vrv.vn/spec/rxuq10aymw/
Rated performance depends on test conditions and system combinations. “—” means no value was extracted. This sheet does not replace the manufacturer’s technical documentation.
Original source notes
Extracted from the catalogue page and its facing page, where available. Notes may refer to other models or optional accessories.
Notes: Specifications are based on the following conditions; • Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Height difference: 0 m. • Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m. During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures. 111