TECHNICAL SPECIFICATION SHEET · DAIKIN
FXDBQ63AVM
Indoor unit · FXDBQ-A · Concealed ceiling ducted for bedrooms
Data extracted from the English catalogue; not all specifications have been manually verified. Check the original source before use.
| Rated capacity | |
|---|---|
| Cooling capacity · Btu/h | 24,200 |
| Cooling capacity · kW | 7.1 |
| Heating capacity · Btu/h | 27,300 |
| Heating capacity · kW | 8.0 |
| Electrical & efficiency | |
| Power supply | 1-phase, 220-240 V/220-230 V, 50/60 Hz |
| Power consumption*1 · Cooling · kW | 0.090 |
| Power consumption*1 · Heating · kW | 0.090 |
| Airflow & sound | |
| Airflow rate (H/HM/M/ML/L) · m3/min | 22/19/18/16/14.5 |
| Airflow rate (H/HM/M/ML/L) · cfm | 777/671/635/565/512 |
| External static pressure · Pa | 15-50 (15)*2 |
| Sound level (H/HM/M/ML/L)*1 · dB(A) | 35/33/31/29/27 |
| Dimensions & weight | |
| Casing | Galvanized steel plate |
| Dimensions (HxWxD) · mm | 245×1,000×800 |
| Machine weight · kg | 36 |
| Piping & refrigerant | |
| Piping connections · Liquid (Flare) · mm | φ9.5 |
| Piping connections · Gas (Flare) · mm | φ15.9 |
| Piping connections · Drain · mm | VP25 (External Dia. 32/Internal Dia.25) |
Source reference
PCVVN2507Aaprv · PDF page 203 · Printed page 202
General Catalogue 2025; published on VRV.vn as Catalogue 2026 (EN)
Open catalogue PDF · page 203
Model page: https://vrv.vn/spec/fxdbq63avm/
Rated performance depends on test conditions and system combinations. “—” means no value was extracted. This sheet does not replace the manufacturer’s technical documentation.
Original source notes
Extracted from the catalogue page and its facing page, where available. Notes may refer to other models or optional accessories.
Notes: Specifications are based on the following conditions; • Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Height difference: 0 m. • Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Height difference: 0 m. • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions. *1: Power consumption values are based on conditions of rated external static pressure. *2: External static pressure is changeable to set by the remote controller. These values indicate the lowest and highest possible static pressures. The rated static pressure is 15 Pa. 202 stinU roodnI